Tuesday, June 30, 2009

Hioki 3192 AC/DC Digital Power HiTester For Sale



3192 AC/DC DIGITAL POWER Hi Tester

For the Measurement of DC Supplies and Inverter Controllers

SPECIFICATIONS

Power supply : 85 to 132V AC, 170 to 250V AC (50/60Hz), switched automatically
Dimensions : 430W x 150H x 400Dmnv 15kg(with all options)

• Wide frequency range power measurements of DC, and 10Hz to 100kHz
• From single-phase to three-phase four wire
• Simultaneous display of four values
• The flexibility to use direct connection or clamp on sensors
• Efficiency of input and output power can be displayed

Accessories : Power cord(l),midget type fuse(4A, 250V), connected!)

OPTION SPECIFICATIONS

(The 3192 alone cannot be used for measurement, please order the required input units. - max. 3ch)

9492 AC/DC Direct Input Unit
• Measurement ranges : 30.00 to 600.0V, 1.000 to 20.00A, power (depends on voltage/current combination) »Accuracy: ±0.1% rdg. ±0.2%f.s.(45 to 66Hz) »Frequency band : DC, 10Hz to 30kHz

9493 AC/DC Direct Input Unit
• Measurement ranges : 30.00 to 600.0V, 10.00m to 2.000A power (depends on voltage/current combination) •Accuracy: ±0.1% rdg. ±0.2%f.s.(45 to 66Hz) »Frequency band : DC, 10Hz to 50kHz


FACTORY-FITTED OPTION

9490 Printer Unit

9494 AC/DC Shunt Input Unit
• Measurement ranges : 30.00 to 600.0V, shunt input 10.00 to 200.0mV (display when CT ratio = 1 1.000 to 20.00A) »Accuracy : ±0.1%rdg. +0.2%f.s.(45 to 66Hz)
• Frequency band : DC, 10Hz to 100kHz

9495 AC/DC Clamp Input Unit
• Compatible models : 9277, 9278, 9279 clamp sensors

1195 Recording Paper(30m, 10 rolls)
9492 AC/DC Direct Input Unit
9151-02 GP-IB Connector Cable(2m)
9493 AC/DC Direct Input Unit
9151-04 GP-IB Connector Cable(4m)
9494 AC/DC Shunt Input Unit
9277-9279 Universal Clamp on CT
9495 Clamp Input Unit
9491 Integrator and D/A Unit

Download the Hioki 3192 AC/DC Digital Power HiTester brochure here for full specifications.

Item condition: Used
Item price: RM6,800.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com
Call us at 012-3333895 or email multitrade.mte@gmail.com

Monday, June 22, 2009

Ono Sokki CF-880 8 Channel FFT Analyzer For Sale


Ono Sokki CF-880 8 Channel FFT Analyzer.

The CP-880 tracking FFT analyzer is an all-in-one multichannel FFT analyzer capable of performing measurement, processing, display and storage of a variety of characteristics of rotating machinery.

Major processing functions:

- 8 channel time-axis waveform display
- Lissajous (orbit) display
- 8 channel power spectrum analysis
- 1/3 and 1/1 octave analysis
- 3 dimensional spectrum display
- Rpm order ratio analysis
- 8 channel rpm tracking analysis
- Vibration mode animation display by the direct power spectrum method
- Transfer function and coherent function (Option CF-0850)
- A variety of types of time-axis data and fequency-axis data averaging
- Arthemetic operations, differentiation and intergration.

Storage function:

- CRT block memory
Time-axis data and spectrum data: 32 frames
Tracking data: 3 measurement of data

- Panel condition memory
Panel switch and soft key settings: 2 sets
Setup section setting conditioning storage: 1 set

- Built in floppy disk drive
Type: 3.5 inch, double sided, double density 2DD
Storage capacity: 320 files
Time-axis, spectrum data: 1 file/data
Tracking data: 32 files/data or 16 files/data
Panel conditions: 2 sets 1 data/file
Set up: 1 set 1 data/file

Input/output functions:

- Interface GPIB
- Plotter output: 8-bit parellel interface/GPIB interface
- Other output: Composite video signal output


Item condition: Used
Item price: RM3,800.00
Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Anritsu ML522B Measuring Receiver For Sale



300.000-999.999MHz 6Digits res1KHz Memory100 acc1*10E-6 EMF min5dBuV Max100dBuV BW15KHz acc2dB EMF 19-+32dBuV/m Display 4digits res0.1dB units dBuV,dBuV/m

BW:15K,120KHz Detect:Ave Monitor AM/FM earphone IFout,Recorderout DC12V700mA 60H210W175D 3Kg BatteryCase(UM2*6) 40min OPT01:GP-IB


Item condition: Used
Item price: RM950.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Hioki 8850 Memory Hi Corder For Sale


Features:

20MS/s 8bit*64KW/ch function;recorder,memory recorder, X-Yrecorder, FFT printer CRT751*256 70W 180H430W390D 12.6Kg

Analog unit 8941 high speed DC-7MHz 5mV-5V/div off set 8bit input 1Mohms AC/DC/GND 20Ms/s BNC

Analog unit 8942 isolation DC-2MHz 5mV-20V/div off set 8bit input 1Mohms AC/DC/GND 5Ms/s banana

Logic unit 8943 8ch 20Ms/s manual2 cable2 FFT(2ch) power, linear trans,coh 3.9-7.8MHz 1024points avg2-256 IC card GP-IB

Complete with accessories.

Download the Hioki 8850 Memory Hi Corder brochure here for full specifications.

Item condition: Used
Item price: RM 8,000.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Anritsu MG3670A Digital Modulation Signal Generator For Sale


The MG3670A Digital Modulation Signal Generator is equipped with a high-performance quadrature modulator. It outputs the signals needed to develop, test and evaluate digital mobile communications equipment and related devices. It cover the frequency range from 300kHz to 2.1GHz and provides a stable and precise output as will as spectral purity up to a maximum output of +13 dBm, even with modulation. In addition to testing receiver sensitivity and excess input, it can be used for testing IF stage performance and for evaluating device quality.

Download the Anritsu MG-3670A brochure here for full specifications.

Item condition: Used
Item price: RM10,800.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

San-ei Omniace RT2108A Chart Recorder For Sale


Sanei Omniace RT-2108-A data chart recorder. 8 channels. Price negotiable.

Item condition: Used
Item price: RM750.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Stag Orbit 48 Portable Programmer For Sale


Device Features:

Device support for MICROs, EPROMs, EEPROMs, FLASH & CMOS PROMs
Optional EPLD Docking Module
Serial EEPROMs and 'Intel' style Micros as standard
Wide blade 48 pin DIP socket takes 0.3" to 0.6" pitch devices
Fitted with 4 Mbits RAM expandable up to 16 Mbits
Operational simplicity with custom designed keypad and high contrast SuperTwist LCD
Ultra low profile design ensures Orbit 48 will fit easily into one half of a standard briefcase
Device library held in non-volatile FLASH memory
Surface Mount Construction for reliability
Emulates 8-bit and 16-bit devices as standard with optional buffered cable
Emulation with Stag's unique 'Edit While You Run' feature – now there's no need to turn off the target system in order to edit data.

Programming Features:

High Speed programming to manufactures certified specification.
Pre-Program checks are selectable (empty check, bit check, or none).
Verify Margins can be modified from approved algorithms to marginal conditions (+/- 10% deviation from normal).
Security Lock (sector protect) will disable both program and erase operation in any number of available sectors for in-circuit programmable devices.
Device Check for correct insertion and faults.
Bus Isolation for data integrity with 208 drivers built in.
Turbo Charge Modes in addition to the inherent high speed two features are embodied:
* Skip - where the programmer does not attempt to program empty locations.
* Memory Mapping - which allows areas of the programmable device not used to be excluded from the program, erase and verify field, thereby increasing throughput proportionally.

Support:

4 sockets in gang or set and up to eight sockets in gang mode depending on plug in module.
EPROMS, EEPROMS, FLASH, Serial EPROMS, and Microcontrollers.
Package Types DIP and PLCC (no third party adaptors required).
Low Voltage Technologies - all voltages from 2.0V up to 7.0V enabling support of 2.4V and 3.3V technologies.
8, 16 and 32 bit modes.

Operating:

User set-up restored on power up.
Low cost of ownership and low cost module configurations.
Memory device data editing tools include:
* List or Change Data
* Insert/delete Bytes
* Fill Ram
* Block Move
* String Search
Edit functions can be locked out for production use.

Data Transfer:

Optional Parallel Interface - high speed standard IEEE 1284 parallel port giving enhanced bi-directional communication.
Download speed is further enhanced by DMA.
Supplied with StagCom95 and cable.

Device Support
EPROMS, EEPROMS, Serial EPROMS, FLASH and Microcontrollers.

Processor
32 bit Embedded RISC Microcontroller with cache memory.

Memory
4 Mbytes (32Mbits) standard. 16 Mbytes (128Mbytes) expansion using 72 pin SIMMs.

Local interface
Display: 20 x 4 character alphanumeric back-lit LCD. Keypad: Silicon rubber, tactile 23 keys including dedicated program and cursor buttons.

I/O Port
Serial RS232 port with Baud rate selection 1200, thru 115200. Programmable stop bit. Hardware handshaking protocol. Data transfer to and from all platforms including PC, VAX, SUN, Macintosh. I/O format selection includes: ASCII, HEX Space, binary, binary rubout, Intel 32 bit, Motorola S-Record, Stag binary, Stag Hex, Extended TEK-Hex.

Dimensions
440 x 260 x 130mm. (17.2 x 10.4 x 5.2").

Weight
500g. (1.1lb).


Download the Stag Orbit 48 supported device list here.
Download the Stag Orbit 48 user manual here.

Item condition: Used
Item price: RM4,800.00

Meguro Wow Flutter Meter MK-668U For Sale


Meguro Wow Flutter Meter MK-668U.

Item condition: Used
Item price: RM200.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Topward TWF-733 Wow Flutter Meter For Sale


Center FREQ. 3KHz, 3.15KHz
Self Calibration * Self Calibration
4 Digits Display Center FREQ. * 4 Digits Display Center FREQ.

Range: 0.03% ~ 3%, 5Ranges
Meter range : Within ±5% of Full Scale Indication Meter range: Within ± 5% of Full Scale Indication
Indication : CCIR, DIN, NAB, JIS Indication: CCIR, DIN, NAB, JIS
Center Frequency : 3.15KHz ±200Hz (din) 3KHz ±200Hz (ccir, nab, jis) Center Frequency: 3.15KHz ± 200Hz (din) 3KHz ± 200Hz (ccir, nab, jis)
Input level : 5mV ~ 10Vrms Input level: 5mV ~ 10Vrms
Input impedance : OVER 300KΩ Input impedance: OVER 300KΩ
Function : LIN, WOW, FLUTTER, WTD Function: LIN, WOW, FLUTTER, WTD

Item condition: Used
Item price: RM200.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Hioki 8834 Line Monitor Hi-Corder For Sale


Hioki 8834 Line Monitor HiCorder.

Item condition: Used
Item price: RM2,500.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Escort EDM-2116 Digital Multimeter For Sale


Escort EDM-2116 digital multimeter with 3 and 1/2 digit LCD display. Sold without probes.

Item condition: Used
Item price: RM150.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Kikusui AVM13 AC Voltmeter For Sale


The Kikusui AVM13 AC Voltmeter measures AC voltages over the 10Hz to 500kHz range. The needle response characteristic is average response. The scale is calibrated with the rms value with sine wave input. The Kikusui AVM13 AC Voltmeter has a voltage main scale.

Form Factor Benchtop
AC Volts Minimum Range 300 uV
AC Volts Maximum Range 100 V
AC Volts Minimum Frequency 10 Hz
AC Volts Maximum Frequency 500 kHz
AC Volts Basic 1 Year Accuracy 3 %
True Rms (?) Yes

Download the Kikusui AVM13 brochure here for the complete specifications.

Item condition: Used
Item price: RM250.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com

Hioki 3181-01 Digitial Power Hi Tester For Sale


The Hioki 3181-01 is a compact, lightweight instrument designed to measure power consumption and/or integrated power in electrical equipment and household appliances by simply plugging the device into the unit. Its multifunction features also let you obtain separate voltage and current measurements.

Power consumption, Voltage/Current measurements Power, voltage or current is selected by pressing the appropriate Function Switch, with measurement results output to a 3V2-digit LCD.
The 3181 reports up to 1,000kWh on its 6-digit LCD.

AC voltage and current are quantified by the true root-mean-square (TRMS) method for accurate measurement of distorted waveforms typically produced by thyristor-controlled equipment. Simultaneous recording of power, voltage, and current measurements. Separate output terminals are provided for each measurement function, allowing you to connect individual recorders for monitoring changes occurring at various points in a machine cycle.

Input voltage 85 - 125VAC

Download the Hioki 3181-01 brochure here for the complete specifications.

Item condition: Used
Item price: RM450.00

Call us at +(6)012-3333895 or email multitrade.mte@gmail.com